- Please read this instruction carefully before your start.
- Our mirrors are supplied with a protective film. Remove this film only after applying the self-adhesive pads as to protect the mirror as long as possible.
- Wall-Art cannot be held responsible for any type of damage when not following this instruction.
-
Step 1
Determine how to hang your mirror. Put the mirror on a soft and flat surface to avoid scratches. The rear of the mirror should be clean, dry, free of grease etc. before applying the self-adhesive pads.
-
Step 2
We recommend to apply the self-adhesive pads on the top 1/3 of the mirror. To make sure the mirror does not tip over, distance pads can be applied at the bottom. Make sure all elements are divdided parallel and evenly.
-
Step 3
Remove the protective film of the self-adhesive pads and aplly firmly on the rear of the mirror, press for about 15 seconds. Maximum holding force will be reached after about 30 minutes.
-
Step 4
Now carefully remove the protective film of the mirror. Do not use any sharp tool as not to damage the mirror.
-
Step 5
The mirror can now be hung to the wall, enjoy your mirror!
Please use a soft cloth for cleaning the mirror. If necessary a damp cloth can be used. Make sure no aggresive materials or chemicals are used. Wall-Art can not be held responsible for scratches or other damages.