Aluminium Print Copper Splashback – Standing
Wonderful splashback on aluminium dibond with copper effect, you will get a high quality, modern and individual piece of wall art.
- High quality, modern look and feel.
- This splashback is available in various sizes.
Our alu-dibond wall art splashbacks with copper look have the following features:
- printed on high quality 3 mm thick aluminium
- brushed aluminium in copper look
- UV- and weather resistant
- resistant against breaking, bending and scratching
Please note, we can not influence the direction in which the brushed surface goes.
Cleaning your splashback
You can easily clean your aluminium dibond splashback with a soft cloth and a mild detergent. Be sure not to use any chemicals, rough sponges or any other materials which can scratch the surface.
There are three different options for you to install the kitchen wall panel. You can order the required accessories as a complementary product. It is important to prepare the installation on a clean, dry and non-greasy base. The two methods below are intented for permanent bonding, which means the surface on which the kitchen wall panel is attached to may damage when removing the wall panel. We accept no liability for assembly errors.
Attaching the kitchen wall panel with wall clamps:
The delivery includes 4 universal dowels, 4 screws, 1 hex key and 4 round clamps made of high-quality stainless steel. The wall spacing is 16 mm, the diameter of the clamp holders is 15 mm. Do not over-tighten the clamps as this could damage the print itself.
Attaching the kitchen wall panel with silicone
Apply the silicone to the back of the kitchen wall panel in a wavy manner. Position the wall panel where you want it, press it gently, and, if necessary, align it gently. To prevent moisture and dirt getting behind the wall panel, you can seal the gaps with silicone as well.
Attaching the kitchen wall panel with foam tape
Apply the foam tape to the back of the wall panel. Divide the area into several sections so there are enough fixation points. Please note it is difficult to remove the wall panel again once it has been attached to your wall.