Instructions for Wall Art Wooden Lamps
-
Leveringsomvang
1 small wooden construction ring / 1 large wooden construction ring / wooden slats / fitting for lamp
-
Stap 1
Remove the locking ring from the lamp fitting. Attach the small wooden ring and re-apply the plastic locking ring, make sure to screw this all the way so the wooden ring is attached firmly on the fitting.
-
Stap 2
Apply the first slat in the small wooden ring (please see the image as reference) . Make sure the slots in the slat and wooden ring fit in each other.
-
Stap 3
Fix the other side of the first slat on the large wooden ring. Make sure the slots in the slat and wooden ring fit in each other. Do this carefully, do not damge the large wooden ring.
-
Stap 4
Follow this procedure with all other slats.
-
Stap 5
Insert the LED lamp (not supplied) into the fitting. Congratulations, you just made your own designer lamp!
- The LED lamp can be inserted after step 1.
- We recommend not to use the lamp in damp/moist areas, such as the bathroom.
- Always be careful with electricity. When in doubt, contact a specialist.