EUR
SEK
NOK
DKK
USD
The wall-prints, or self-adhesive prints are easy to apply. No glue is needed. The quality, colours and ease of use will astonish you.
- Please read all steps of this manual before your start.
- Freshly painted walls need a drying period of about 3 weeks for the paint to completely set and be ready for the wall-print.
- Make sure your wall is clean, flat, free of dust, grease and silicone.
- For a large wall-print we advise to have a helping hand, more fun and easier to work.
-
Mark the position of the wall-print on the wall with some marking points or lines with a soft pencil.
-
Pull the upper part of the supporting film foil off and fold it backwards so the adhesive part is exposed.
-
Start at the top, hold the print against the marking points and stick this carefully to the wall. If your are sure of the position press the print carefully to the wall.
-
Slowly pull the backing paper further downwards, and press the print against the wall. Make sure no air bubbles are formed.
-
Use a soft cloth to wipe over the print in order to press this firmly to the wall. Possible small air bubbles can be removed by using a small and sharp needle.
