Application Guide Photo Wallpaper
We try our very best to supply you with the highest quality possible. In very rare cases an error can occur. Please check your order before applying it to the wall. Reclamations cannot be accepted when a faulty item has (partly) been applied to the wall.
- Please read this complete instruction before you start.
- In case of freshly painted walls please allow at least 10 days for drying.
- The wall surface should be free of grease, dust, latex or silicone.
- Application will be faster and more fun with the help of another person.
Fleece Wallpaper
Fleece Photo Wallpapers are non-woven large-scale decorations supplied in one or several parts. For applying the wallpaper we recommend using a standard universal adhesive. The size of the wallpaper can be easily customised with a cutter. The following six steps will help you with the application – please read them thoroughly!
wallpaper, application instructions, universal adhesive, bucket with water, roller, ruler, cutter, pencil, spirit level, soft sponge and scissors.
-
Step 1
Unroll the panels of wallpaper and put them in order – separate the individual panels from each other using scissors (there are help-lines for cutting on the back of the wallpaper).
-
Step 2
Measure the wall and mark the points on the wall with the pencil. For better results it is recommended to mark the points for each individual panel.
-
Step 3
Mix the adhesive with water and apply it to the wall generously. It is better to apply too much than too little of the adhesive, the excess can be removed later. Please have in mind that the adhesive should only be applied to the wall, not on the wallpaper itself!
-
Step 4
It is best to start with the first left panel – stick it to the wall making sure it fits the markings made before. Start at the top and press with the roller downwards.
-
Step 5
Use the level to make sure the panel is properly aligned, adjust it when needed. Now take the second panel and stick it next to the first one making sure they don’t overlap, use the roller to press it downwards. Follow the steps 4 and 5 for the remaining panels. If there are any remains of the adhesive, you can now carefully wipe them off with a soft sponge – please don’t use a cloth, it could damage the wallpaper!
-
Step 6
When all the panels are on the wall, fix them again with the roller. If necessary, the panels can now be adjusted with the cutter. Now it’s ready!