EUR
SEK
NOK
DKK
USD
-
- Furniture foil
- Glass cleaner
- Plant spray
- Soft dust-free cloth
- Ruler
- Sharp knife
- Squegee (optional) -
Remove all handles and knobs. Clean the surface thoroughly. The surface has to be free of dirt, grease/fat and dust. Make sure the after cleaning no markings and/or stripes are left behind.
-
Measure the size of the door/drawer on which the foil has to be applied. Cut the sheet so that you have a small overlap on all sides of the surface.
-
Mix 1 to 3 drops of detergent with one litre of water. Spray the position of the sticker with this mix using the plant spray.
Remove the first 20cm of backing paper of the foil, position the sheet on the surface and apply some pressure so the sheet will hold. Then remove the rest of the backing paper. -
Gently push the door sticker against the surface, wiping away excess water. Slowly pull away the backing paper piece by piece and push the door sticker gently against the surface. Use your hands or squeegee to remove the water between the sticker and surface. Wipe outwards, starting from the center of the sticker. Make sure no air bubbles are formed, make sure all water is removed/wiped away. When ready, let the sticker dry for at least 1 to 3 hours.
-
Carefully cut away excess sticker.
-
Make holes for the handles and knobs and put them back. Enjoy your sticker!
- Not following this instruction will lead to a less than optimal end resulst. Wall-Art cannot be held responsible in any way when not following this instruction.
- Small air bubbles can be removed with a sharp needle.
- Please perform this task with another set of hands. Easier and more fun.
