Yes, you can place your order during the Coronacrisis. We produce and deliver to you safely.

Application Guide Frosted Window Film

  • This product's intended use is for glass or glass doors.
  • Individual parts, for instance separate leaves with trees, can be applied at wish. The parts can be cut using scissors, then apply them all as individual stickers.
  • We recommend to perform this job with two, more fun and it makes the job easier.
  • Your window film may have some air bubbles when it is still on the backing paper. These have no effect on the quality or lifespan on the sticker. After applying, these bubbles will no longer be there.


'Wet' Instruction for applying large window stickers

  • Materials needed

    Glass cleaner / Detergent / Plant Spray / Soft dust-free cloth / Marker / Sharp Knife / Squegee (Optional)

  • Step 1

    Clean the window thoroughly. The window has to be free of dirt, grease/fat and dust. Make sure the after cleaning no markings and/or stripes are left behind.

  • Step 2

    Mark the position of the window sticker on the window using the marker.

  • Step 3

    Mix 1 to 3 drops of detergent with one litre of water. Spray the position of the window sticker with this mix using the plant spray.

  • Step 4

    Remove the white backing paper from the window sticker, pull back the top 10 to 20cm of the backing paper. Now gently apply the foil to the wet window and wipe away gently the excess water. Slowly, piece by piece, remove the backing paper and apply the foil to the window, wiping away excessive water.

  • Step 5

    Use your hands or squeegee to remove the water between the sticker and window. Wipe outwards, starting from the center of the foil. Make sure no air bubbles are formed, make sure all water is removed/wiped away. After this, the foil has to dry for about 8 to 24 hours. During this period the window sticker will stick to the window as the water will evaporate.

  • Step 6

    After drying, please press the window sticker firmly to the window sticker. Do this with your hands or squegee. The protruding window foil can be cut away, make sure not to damage the frame of the window.

  • Ready

    If the window sticker releases from the window, it needs to dry somewhat longer. Small air bubbles can be removed by using a needle. It is possible that white stains arise, these will disappear after a few days.

Thank you!

- There are no products in your basket -

Continue shopping