- 1 clockface
- 1 clockwork
- 1 large hand
- 1 small hand
- 1 spacer
- 1 nut
- 1 cover pin (f)
-
Step 1
Put the clockwork on a flat surface and attach the spacer (b). Attach the clockface (g) and lock this tight with the locknut. Make sure the hanging point of the clockwork is even with the top of the clockface (12).
-
Step 2
Remove the covering film from the hands. First attach the small hand (d), after that the large hand (e). Make sure not to bend the hands. In case of a bent hand, carefully bend it back.
-
Step 3
Last step, attach the cover pin (f) and press this firmly. Install the battery, make sure the polarity matches the clockwork. Ready!