Our glass prints are made on 4mm thick safety-glass and are delivered including wall mountings and spacers.

• 4mm thick safety glass
• scratch and dent resistant
• state of the art direct printing resulting in a high-resolution 3D effect
• high colour intensity and saturation
• 'made in Europe'
• easy to hang using optional wall brackets and with the included self-adhesive spacers
• easily attach the self-adhesive spacers on the backside of your wall art. The spacers are included in your delivery.
• also available without wall hangings.

Important!: All available attachment points at the back of the glass should be used for hanging in order to distribute the weight of the glass evenly. Do not hang the glass with rope, wires etc as this causes an excessive force on the wall mounts. Be sure to always fasten the wall decoration with screws/hooks. Wall-Art is not responsible for not damages when not following this instruction.

Important!: Glass prints with a white background may have a slight green tint which is typical of ESG glass

Important!: The wall mountings are designed to take all weight in a vertical direction, use of wire or cable results in a force on an angle, which will not hold. It is strictly prohibited to use cable/wire/rope to hang the wall-art. Wall-Art is not responsible for not damages when not following this instruction.

Instead of wall mounting, wall clamps can be used. In this case, select 'no hanger' and order the wall clamps separately, see the supplementary products. Please check our instructions on how to properly mount the wall brackets.

Screws and plugs for the wall are not included

Please check and follow the instructions.

Your own image or photo as glass print? Please check our foto-uploader.